well if you center it up in the rear wel then when it compresses it will rub the rear of the well. there is no way to change that pivot point without changing to many factors.

35's are going to have to wait till it is paid for and I can buy another vehicle as the family ride. RIght now my 5' 2" wife can barely see over the window. Although she has still yet to notice it. FIne by me. <img src="/forums/images/graemlins/nana.gif" alt="" />

FOr the rag joint I will add some pics in the write up with all of that stuff. It actually turned out perfect and I would say is very close to a stock fitting that I added. I will get pics up shortly. it did require some welding but all of it was done to a seperate piece so nothing was cut on the arm.