Getting ready for drivetrain lift

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Getting ready for drivetrain lift [Re: 4Crawler] #613207 06/10/05 06:42 PM

Joined: Dec 2002

Posts: 356

Montreal

Spacetrucking Offline

Mudrunner

Thanks for the good info here and on your site as usual Roger! I'll be getting in touch with you shortly for some parts to get this going.
Thanks again, take care,
Hugh

'86 SR-5 Extra-cab 4 x 4, 2" BL, 33 x 12.5 x 15R M/T on 15 x 8 rockcrawlers ( 3 3/4" BS ), 22RE 5 sp , 4.88's Detroit True-Trac front, V6 open rear, 24 mm Sway-Away + Rancho 5000's, removed sway bar, no-rust south US bed, Ramsey 8000 winch

Entire Thread
Subject	Posted By	Posted
Getting ready for drivetrain lift	Spacetrucking	06/10/05 01:03 PM
Re: Getting ready for drivetrain lift	J94_4runner	06/10/05 02:02 PM
Re: Getting ready for drivetrain lift	4Crawler	06/10/05 03:38 PM
Re: Getting ready for drivetrain lift	Spacetrucking	06/10/05 06:42 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.559s Queries: 16 (3.556s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-19 20:16:27 UTC
Valid HTML 5 and Valid CSS