|
|
|
|
screwed up Exaust
#615125
06/15/05 11:22 PM
|
Joined: Jan 2005
Posts: 21
OP
Need a Spot
|
My 22Re has had a noticible exust leak from the rear end of the exaust manifold where it mates with the header since the day I bought it. The ticking sound is always loud when cold and almost un-noticible when hot. I figured it was the manifold/header gasket, and replaced it. I drove the truck with this new gasket for 10 minutes when it was cold to a mechanic because a stud on the head was stripped and it still leaked exaust. The mechanic says the brand new gasket (60$ at Toy dealer) is blown from the 10 min drive and the head must be pulled and machined to fix the stripped stud.
Is this guy full of it or what? <img src="/forums/images/graemlins/confused.gif" alt="" />
DailyDriver: '94 Xcab 4x4, 22RE, 139K miles, STOCK
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.090s Queries: 15 (4.088s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-11-18 03:19:25 UTCValid HTML 5 and Valid CSS