Quote
so 30psi is not an unreasonable pressure then to run on the road! one of my buddies run 27psi with 32's and i thought it was to low.


Figure out what works best for your tires on your wheels on your truck. Close to half a dozen techniques on the web page above to determine a good pressure to use, 30 is decent. If you get even tread contact and wear, then that works. If I run 30 psi on mine (on 15x6 wheels) I get faster tread wear in the center, I need to drop to about 22 -24 psi to get even tread contact. So I run down there most of the time then run them in the 30-40 psi range for long highway trips to get better fuel mileage and handling.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code