Well im now seeing fluids leaking from in between the bellhousing and tranny. The last time i saw this the case was cracked on the old tranny. Lord not again...And Jim i do have slight drive line vibrations from the rear axle. Thats next on the list I have to re seat the axle in the pins so it doesnt rock. But if it was the throw out wouldnt it do it in all gears and not just in 4th and 5th. Maybe its that slight loss of power when i decelerate combined with the vibration. But then why is it leaking fluid, Engine oil and ATF is totally different so i know its not engine. I will go throw and check all my u-joints and stuff. When i did the Engine tranny rebuild/replace i did u-joints and made sure it was all tight. The rear axle poped out since the work and i just havent done it yet. Its not all that hard to do is it?