Repacking bearings - how?? - 4x4Wire TrailTalk

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Repacking bearings - how?? [Re: JohnnyBfromPeoria] #616816 06/21/05 03:30 AM

Joined: Feb 2005

Posts: 509

SF Bay Area

Winston

Rock Warrior

I got one of the Ford tools. It only has four points so you only have to grind off two. Not that it is much easier than grinding off four points.

'90 Montero XLS (Sold, sadly)
'95 Montero LS 160k
'03 Montero Limited 30k

Entire Thread
Subject	Posted By	Posted
Repacking bearings - how??	AZOutsider	06/20/05 05:23 PM
Re: Repacking bearings - how??	FrankR	06/20/05 06:25 PM
Re: Repacking bearings - how??	JohnnyBfromPeoria	06/21/05 01:59 AM
Re: Repacking bearings - how??	Winston	06/21/05 03:30 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.634s Queries: 16 (3.631s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-06-07 09:17:00 UTC
Valid HTML 5 and Valid CSS