Rear spring perch width

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear spring perch width [Re: 4Crawler] #620103 07/09/05 06:06 PM

Joined: Jun 2000

Posts: 1,002

The OC

carter

Body Damage is Cool

I looked at grinding notches in the perches to fit the narrower ubolts, but it would have comprimised the end bracing of the perch and I would have had to fab up new bracing.

This is my dd and I really don't feel like spending time messing around with it, so I am still looking for a set of spring plates.

Someone must have a set of these lying around after a ubolt flip... Buller???

Mike Carter
85 & 86 4Runners

My Website

Entire Thread
Subject	Posted By	Posted
Rear spring perch width	carter	06/27/05 11:23 PM
Re: Rear spring perch width	ErikB	06/28/05 05:50 PM
Re: Rear spring perch width	4Crawler	06/28/05 06:16 PM
Re: Rear spring perch width	carter	06/28/05 06:50 PM
Re: Rear spring perch width	Brian894X4	06/28/05 07:00 PM
Re: Rear spring perch width	carter	07/09/05 06:06 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.431s Queries: 16 (3.429s) Memory: 0.6035 MB (Peak: 0.6365 MB) Data Comp: Off Server Time: 2026-05-28 17:43:42 UTC
Valid HTML 5 and Valid CSS