The bearing repack article is of no help. I have a '95 Rodeo that this would work, but on my '02 model, the hubs aren't on the end of the axle shaft. It looks nothing like the pics in the article. Mine has an axle nut at the end - that's all - similar to a 2 wd vehicle.

The new rotors that I bought are the type that are held in place by the rim and lug nuts. You know the type - they have a large diameter hole to fit over the hubs and just sit there. The rim w/lug nuts then hold it in place. The ones on the truck look identical, but I've beat them to death with a 3 lb hammer and they won't budge.

The only other way that I can determine in which they would come off is to remove the axle nut and pull the whole assembly; however, I don't want do it if it isn't necessary. Anyone got a clue as to how these come off????

Thanks for the help,
Jim