88 XJ leaking

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 88 XJ leaking [Re: BigJim] #623968 07/08/05 03:06 AM

Anonymous

Unregistered

My chilton had all the directions to do it. The key is to make sure that there is 100% no oil when you add the RTV on the bearing caps. It also helps a lot if you remove all the bearing caps and support the crank with a jack stand.

Entire Thread
Subject	Posted By	Posted
88 XJ leaking	RSimister	07/07/05 03:16 PM
Re: 88 XJ leaking	BigJim	07/07/05 03:42 PM
Re: 88 XJ leaking	Anonymous	07/08/05 03:06 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.581s Queries: 16 (3.579s) Memory: 0.5934 MB (Peak: 0.6264 MB) Data Comp: Off Server Time: 2026-06-11 10:48:52 UTC
Valid HTML 5 and Valid CSS