air cylinder slave

The cylinder pictured in this post seems to be about the same dimensions as mine. Maybe what I have will work.

http://www.universityofjeep.ca/forums/showthread.php?t=6785

I emailed the guy a few questions, it seems he works in the pneumatic cylinder industry.

These are all spring-return which is unlike most slaves which are spring-extend. The difference is you adjust your rod at-rest length by adding hardware to the end of the rod.


here's the writeup I initially saw (same guy). This cylinder is obviously a lot stronger. I would like to get something like this.

http://www.universityofjeep.ca/Tech/Clutch/Clutch_Slave_Repair.htm

CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender