Passenger side about mid-way on the valve cover(under the intake). You will need a long pair of needle nose plyers. I purchased a new hose as well as my hose was brittle and fell to pieces when I took it off. The hardest part is getting the grommet back in with the PCV valve(you will need a new one of these also, since it will be hard as a rock). Put a little greese on the PCV valve and it should go......It's a pain and takes some time.

- Daily Driver - 2004 Corolla
- Off Road - 1992 Pickup SR5 3.0L 4x4
- Fun - 2001 Camaro SS (320 RWHP/330 RWTQ)
http://community.webshots.com/user/1fastss