Ign.Mod.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Ign.Mod. #626711 07/15/05 12:44 AM

Joined: Aug 2003

Posts: 131

Waymart, Pa.

Trooper0601 Offline

Wheeler

Hey, what's up? I'm in the process of changing a few more parts, but my Haynes manual says nothing about the ignition module in my 2.6. The manual covers the V6 but not the 4cyl. Does the 4ZE1 even have an ign. module? If so, how difficult is it to replace? Thanks

'89 Trooper 2.6L automatic--216,000+ miles

Entire Thread
Subject	Posted By	Posted
Ign.Mod.	Trooper0601	07/15/05 12:44 AM
Re: Ign.Mod.	Richard Saylor	07/15/05 01:04 AM
Re: Ign.Mod.	Trooper0601	07/15/05 01:23 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.221s Queries: 15 (3.546s) Memory: 0.5973 MB (Peak: 0.6303 MB) Data Comp: Off Server Time: 2026-06-17 15:24:17 UTC
Valid HTML 5 and Valid CSS