IFS Swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: IFS Swap [Re: Kaptain] #627575 07/17/05 06:18 PM

Joined: Feb 2004

Posts: 290

Duncannon, Pa

Kaptain

Mudrunner

Okay, i got it... Tapped the driver side shaft out easily with a hammer, and pulled the other side with a dent puller <img src="/forums/images/graemlins/kewl.gif" alt="" /> (Fabbed a piece of steel that was bolted to two sides of the flange and hole in the center for the puller) Worked out very well.

93' Toy xCab
bobbed > 22rEB > w56 > stock duals > SAS > 4.88's > 37's

Entire Thread
Subject	Posted By	Posted
IFS Swap	Kaptain	07/17/05 03:54 PM
Re: IFS Swap	Kaptain	07/17/05 06:18 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.516s Queries: 16 (3.515s) Memory: 0.5941 MB (Peak: 0.6271 MB) Data Comp: Off Server Time: 2026-06-13 19:34:51 UTC
Valid HTML 5 and Valid CSS