Bent Wrangler YJ frame

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Bent Wrangler YJ frame #627638 07/18/05 01:56 AM

Anonymous

Unregistered

95 Wrangler YJ took on a light post. Bumper and tube behind it bent in a "V". Grill and hood damaged. Ends of frame ahead of front cross member are bent in. Can these be cut off and new ends (with tube) welded on? If so, where can i find them? Or do I need to take the jeep to a frame shop and have the ends straightened?

Thanks
Mike B

Entire Thread
Subject	Posted By	Posted
Bent Wrangler YJ frame	Anonymous	07/18/05 01:56 AM
Re: Bent Wrangler YJ frame	Anonymous	07/18/05 02:36 AM
Re: Bent Wrangler YJ frame	NCBBA2358	07/18/05 03:17 PM
Re: Bent Wrangler YJ frame	tomriddle	07/18/05 11:07 PM
Re: Bent Wrangler YJ frame	Flouris	07/20/05 03:58 PM
Re: Bent Wrangler YJ frame	tomriddle	07/20/05 11:19 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.486s Queries: 15 (3.709s) Memory: 0.6003 MB (Peak: 0.6333 MB) Data Comp: Off Server Time: 2026-06-15 18:54:31 UTC
Valid HTML 5 and Valid CSS