I generally don't have much like using the various techniques for quick crankshaft pulley removal. My solution has been to remove the starter, or in some way get acess to the fly wheel. The idea is to jam something solid in the teeth the starter uses, then get the biggest breaker bar you can find and go to town. On my '98 3.2 I found by rmoving the acess cover on the bottom of the manual trans I can stuff a larger allen key up in there and get it wedged in so nothing moves. My old 2.6 required removing the starter.

good luck

Mike

Mike Walter
'98 Amigo well used
'94 Rodeo in need of help
'99 Ram CTD for hauling feather pillows
'01 unheated shop