Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 3 1 2 3
Re: Urgent! Crankshaft pulley nut stuck, tried everything! UPDATED: still no luck. [Re: FSJ1978] #628537 10/11/05 04:39 AM
Joined: Jul 2005
Posts: 681
Troopersphere Offline
Rock Warrior
Dang... that thang was really on there!

Quote
I know this is a "little" late, but you can also put a breaker bar on it with enough of an extension (piece of pipe perhaps) to rest it on the frame... Bump the starter and presto, unstuck bolt.


I dunno Chris, didya read the post where he BROKE a 1/2 inch extension ? or where he put the 500 ft/lb impact wrench on there ? I highly doubt that piddly little starter woulda done nothin' but SMOKED like an 8 pill CB linyer ...

73 !


C/YA!
Jeff
'88 Trooper
2DR LWB 4ZE1 5SP
bone stock DD
Re: Urgent! Crankshaft pulley nut stuck, tried everything! UPDATED: still no luck. [Re: FSJ1978] #628538 10/11/05 11:33 PM
Joined: Oct 2002
Posts: 320
B
BobDole Offline OP
Mudrunner
Tried that in the first post.
<img src="/forums/images/graemlins/cheers.gif" alt="" />

Page 3 of 3 1 2 3







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.006s) Memory: 0.5950 MB (Peak: 0.6435 MB) Data Comp: Off Server Time: 2026-07-13 04:54:41 UTC
Valid HTML 5 and Valid CSS