Whats the trick w/ these $@## CV axles?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Whats the trick w/ these $@## CV axles? [Re: wave] #629478 07/24/05 05:04 AM

Joined: Apr 2002

Posts: 3,568

Grass Valley, CA

Snowtoy

Roll Me Over

Yep, unbolt the ball joints and you will have all of the room you need. This is the only way I do it anymore on oem set-up rigs. To make it easier in the future, replace the studs with bolts.

More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed

Entire Thread
Subject	Posted By	Posted
Whats the trick w/ these $@## CV axles?	wave	07/23/05 07:07 PM
Re: Whats the trick w/ these $@## CV axles?	4Crawler	07/23/05 08:38 PM
Re: Whats the trick w/ these $@## CV axles?	Snowtoy	07/24/05 05:04 AM
Re: Whats the trick w/ these $@## CV axles?	TheBandit	07/24/05 05:27 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.417s Queries: 16 (3.415s) Memory: 0.5983 MB (Peak: 0.6313 MB) Data Comp: Off Server Time: 2026-06-04 01:02:45 UTC
Valid HTML 5 and Valid CSS