Jeep knowledge needed

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Jeep knowledge needed [Re: BigJim] #629904 07/26/05 03:27 AM

Anonymous

Unregistered

The 4x4 conversion is quite easy on an XJ. Needs are a different tranny tailhousing, tcase, front axle, and driveshafts. It's a bolt in as the front axle is located exactly the same in 4x4 and 4x2. The bottom of the passenger compartment is even stamped where you cut the hole for the tcase shifter.

Entire Thread
Subject	Posted By	Posted
Jeep knowledge needed	averkam	07/25/05 11:34 AM
Re: Jeep knowledge needed	BigJim	07/25/05 02:30 PM
Re: Jeep knowledge needed	averkam	07/25/05 05:00 PM
Re: Jeep knowledge needed	Anonymous	07/25/05 06:21 PM
Re: Jeep knowledge needed	BigJim	07/25/05 11:15 PM
Re: Jeep knowledge needed	Anonymous	07/26/05 04:37 AM
Re: Jeep knowledge needed	averkam	07/26/05 11:51 AM
Re: Jeep knowledge needed	jeepdriver	07/26/05 03:14 PM
Re: Jeep knowledge needed	JeePete	07/26/05 04:41 PM
Re: Jeep knowledge needed	NCBBA2358	07/26/05 11:44 PM
Re: Jeep knowledge needed	Anonymous	07/26/05 03:27 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.463s Queries: 16 (3.461s) Memory: 0.6117 MB (Peak: 0.6447 MB) Data Comp: Off Server Time: 2026-06-01 05:01:59 UTC
Valid HTML 5 and Valid CSS