What is the best way to clean the EGR valve?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

What is the best way to clean the EGR valve? #630855 07/28/05 04:48 AM

Joined: Mar 2005

Posts: 8

Southwest Washington

WashingtonKevin Offline

Need a Spot

What is the best way to clean the EGR valve?
I have a 93 V6 running a little rich and hesitating some under acceleration.
I am open to other things to check. Cap and rotor and plugs and wires and fuel filter are ok. No obvious vacuum leaks in intake / maf.

Thanks,
Kevin
on the other hand, I just rebuilt the rear end after the outer pinion bearing let go and all is well again. I am on a short tune up craze here.

Entire Thread
Subject	Posted By	Posted
What is the best way to clean the EGR valve?	WashingtonKevin	07/28/05 04:48 AM
Re: What is the best way to clean the EGR valve?	4Crawler	07/28/05 05:28 AM
Re: What is the best way to clean the EGR valve?	WashingtonKevin	07/28/05 01:28 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.937s Queries: 15 (3.934s) Memory: 0.5964 MB (Peak: 0.6293 MB) Data Comp: Off Server Time: 2026-10-29 10:56:54 UTC
Valid HTML 5 and Valid CSS