|
|
|
|
getting through firewall
#631093
07/28/05 10:26 PM
|
Joined: Jan 2005
Posts: 36
OP
Getting the Wheeling Fever
|
How do I get a wire through the firewall on a 95 toyota 4runner?? (its for a switch for off road lights.)
1995 4runner SR5 PP rear springs Hella FF1000 lights 31X10.5-15 Nokian Vativas <img src="/forums/images/graemlins/frown.gif" alt="" />
|
|
Re: getting through firewall
[Re: Davis5210]
#631094
07/28/05 11:07 PM
|
Joined: Aug 2004
Posts: 1,420
Body Damage is Cool
|
There are numerous locations on the firewall that wires currently pass thru that have rubber grommets surrounding them that are fitted into the holes.I have a 95 4rr and I believe I ran mine thru a hole that is located undeer the console on the drivers side
Russ Toyx4 IN the Toy world <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/patriot.gif" alt="" />
GETTIN OLD THATS EARNED Happy trails to you (1)98 Montero SR RB Rock Crawlers BFG 33s Rancho 9000's OME Med coils rear (2)95 4Runner All Pro Nerf bars BFG 32s ARB bull bar Downey 2" rear coils Downey headers (3) 90 Montero LWB 3.0 auto (4) 98 Kawi GPZ1100
|
|
Re: getting through firewall
[Re: 4xmonty]
#631095
07/29/05 02:46 AM
|
Joined: Jan 2005
Posts: 36
OP
Getting the Wheeling Fever
|
how do you get the rubber grommets off?? do they just pop out??
1995 4runner SR5 PP rear springs Hella FF1000 lights 31X10.5-15 Nokian Vativas <img src="/forums/images/graemlins/frown.gif" alt="" />
|
|
Re: getting through firewall
[Re: Davis5210]
#631096
07/29/05 02:54 AM
|
|
Anonymous
Unregistered
|
I went through the passenger side. I used a small phillips head screwdriver and just poked a hole in the grommett, ran the wire through, then put RTV sealant on the grommet to make sure it didn't leak.
|
|
Re: getting through firewall
#631097
07/29/05 09:42 PM
|
Joined: Aug 2004
Posts: 1,420
Body Damage is Cool
|
I went through the passenger side. I used a small phillips head screwdriver and just poked a hole in the grommett, ran the wire through, then put RTV sealant on the grommet to make sure it didn't leak. I second that thats how I did it too <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/patriot.gif" alt="" /> Russ (Toyx4)
GETTIN OLD THATS EARNED Happy trails to you (1)98 Montero SR RB Rock Crawlers BFG 33s Rancho 9000's OME Med coils rear (2)95 4Runner All Pro Nerf bars BFG 32s ARB bull bar Downey 2" rear coils Downey headers (3) 90 Montero LWB 3.0 auto (4) 98 Kawi GPZ1100
|
|
Re: getting through firewall
[Re: 4xmonty]
#631098
07/30/05 03:14 PM
|
Joined: Jan 2005
Posts: 36
OP
Getting the Wheeling Fever
|
nice <img src="/forums/images/graemlins/cheers.gif" alt="" /> thaks a lot
1995 4runner SR5 PP rear springs Hella FF1000 lights 31X10.5-15 Nokian Vativas <img src="/forums/images/graemlins/frown.gif" alt="" />
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6057 MB (Peak: 0.6753 MB) Data Comp: Off Server Time: 2026-06-17 15:38:28 UTCValid HTML 5 and Valid CSS