|
|
|
|
 Anybody planning on ordering a complete built 3rd from Marlin/AllPro/Randys?
#631314
07/29/05 03:51 PM
|
Joined: Oct 2002
Posts: 1,305
OP
Body Damage is Cool
|
The reason I ask is I am wondering how well they are truly setting them up....I'm looking to do a complete inspection and a write-up on my site. Wouldn't cost anything except the extra shipping to detour it to my place. Pattern check/pinion pre-load/carrier bearing pre-load and Backlash checks. If they are "off" then I will ZUK it. <img src="/forums/images/graemlins/kewl.gif" alt="" /> Anybody else curious like I am?
|
|
|
Re: Anybody planning on ordering a complete built 3rd from Marlin/AllPro/Randys?
[Re: ZUK]
#631315
07/29/05 05:22 PM
|
Joined: Apr 2000
Posts: 4,230
Roll Me Over
|
I ordered a hi-pinion, ARB, Toyota 4:88 gears from Inchworm a last year. Works well, no noise. I will be darned if I am going to pull it and send it to you to inspect. <img src="/forums/images/graemlins/lol.gif" alt="" /> The last time I had it out I checked the pattern and it was spot on!!!!I checked with River City Diff in Rancho Cordova (GearMan, he was the same price as Inchworm but it would have taken a couple of weeks), Marlin, and A-P. Inchworm was the best price by a good amount!!!!!! <img src="/forums/images/graemlins/kewl.gif" alt="" />
David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA
"Serenity through Sobriety"
|
|
|
Re: Anybody planning on ordering a complete built 3rd from Marlin/AllPro/Randys?
[Re: OOP'S]
#631316
07/29/05 05:36 PM
|
Joined: Oct 2004
Posts: 1,270
Body Damage is Cool
|
i ordered one from randys 5.29's 5000 miles later no noise also got a lifetime warranty f0r 20 dollars extra
91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
|
|
|
Re: Anybody planning on ordering a complete built 3rd from Marlin/AllPro/Randys?
[Re: willzrunna96]
#631317
07/29/05 07:21 PM
|
Joined: Oct 2002
Posts: 1,305
OP
Body Damage is Cool
|
are ya sure OOPS? <img src="/forums/images/graemlins/smile.gif" alt="" /> Will--I should have contacted you when you ordered it....dang. <img src="/forums/images/graemlins/cheers.gif" alt="" />ZUK
|
|
|
Re: Anybody planning on ordering a complete built 3rd from Marlin/AllPro/Randys?
[Re: ZUK]
#631318
07/30/05 02:39 AM
|
Joined: Feb 2004
Posts: 1,042
Body Damage is Cool
|
Zuk if you had told me sooner i woulda forwarded mine to you. I think the preload was off it spun alot easyer then the one you did for me. seems to be worken alrite though. It still had pattern paint on it and it had a very good pattern so it was shimmed well.
Welding and Fabrication Engineer
2003 taco V6 ext cab sr5
1988 Toyota Pickup V6(totaled)
|
|
|
|
|
|
