Header getting engine bay too hot !?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Header getting engine bay too hot !? [Re: BennyBoy] #631933 07/31/05 09:10 PM

Joined: Feb 2001

Posts: 3,935

Minnesota

bkg

Roll Me Over

Headers dissipate heat faster than a cast iron manifold, so yes, there is more heat under the hood. That's why ceramic coating is used on a lot of headers.

Brian K. Gallus
I have nothing important to say.

Entire Thread
Subject	Posted By	Posted
Header getting engine bay too hot !?	Jiingwon	07/31/05 07:23 AM
Re: Header getting engine bay too hot !?	kewlynx	07/31/05 07:57 AM
Re: Header getting engine bay too hot !?	TATER	07/31/05 08:15 AM
Re: Header getting engine bay too hot !?	kewlynx	07/31/05 08:38 AM
Re: Header getting engine bay too hot !?	BennyBoy	07/31/05 09:13 AM
Re: Header getting engine bay too hot !?	bkg	07/31/05 09:10 PM
Re: Header getting engine bay too hot !?	4xJedi	07/31/05 10:33 PM
Re: Header getting engine bay too hot !?	yodta	08/01/05 02:09 AM
Re: Header getting engine bay too hot !?	4Crawler	08/01/05 02:35 AM
Re: Header getting engine bay too hot !?	sindersblue	08/01/05 04:47 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.683s Queries: 16 (3.480s) Memory: 0.6126 MB (Peak: 0.6456 MB) Data Comp: Off Server Time: 2026-06-18 11:35:57 UTC
Valid HTML 5 and Valid CSS