I have a 95 T100 2.7L 4Cyl 2wd. There is a seal at the tailshaft on the transmission where theh driveshaft goes into. Mine is leaking and I went to replace it, and the seat that the seal presses into was all scratched up (i think from the seal puller when I pulled the old seal out). I replaced the seal but it still leaks. So, I guess I'm going to have to call around and find a used W56. So my question is, is the W56 from the T100 exactly the same as the W56 used in the Tacoma and Hilux Pickup? If I got a W56 from a Tacoma or Hilux, would it just bolt right in?