Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Rollover #633745 08/06/05 01:16 AM
Joined: Nov 2003
Posts: 27
DA4RNR Offline OP
Getting the Wheeling Fever
My son did me the pleasure of rolling my '85 4Runner. Looks like I might need to cut off the top and get a new one. Anyone have any ideas on where to fine such an animal? The one on their now is not all that bad but I am not sure if it can be repaired. The driver side A post is slightly bent but the passenger A post looks OK. Hood is ok, passenger door ok and even the hard top made it through ok. Both fenders are shot so I think I will put some fiberglass ones on for replacement. Should I just try and repair what I have. I am going to put a roll cage in it and I was thinking if I can just get a windshild to fit with no leaks I would be OK. Any help would be great. Thanks!


Perminant Reminder of a Temporary Feeling
1985 4Runner w/ 3" NWOR Lift Kit
Detroit Lockers
Re: Rollover [Re: DA4RNR] #633746 08/06/05 01:18 AM
Joined: Oct 2002
Posts: 15,887
kewlynx Offline
Toyota & Classifieds Moderator
*****
Check our parts for sale section and this one:

www.car-part.com
www.toyotafiberglass.com (lil' plug for CJM)


http://www.walkablecommunities.org/

Democracy is two wolves and a lamb voting on what to have for dinner. Liberty is a well-armed lamb contesting the vote.

**ubi apis- ibi salus**
Re: Rollover [Re: kewlynx] #633747 08/08/05 06:00 PM
Joined: Nov 2003
Posts: 27
DA4RNR Offline OP
Getting the Wheeling Fever
Thanks for the links. I looked around on the internet over the weekend and found a 86 4Runner with a blown head gasket for $750. Anyone know if their is any difference between the 85 and 86 cabs?


Perminant Reminder of a Temporary Feeling
1985 4Runner w/ 3" NWOR Lift Kit
Detroit Lockers
Re: Rollover [Re: DA4RNR] #633748 08/08/05 07:36 PM
Joined: Jun 2004
Posts: 435
L
lookmomnobrains Offline
Mudrunner
too bad you're in cali. i have a rolling 87 chassis/body you could have for $250.


87 4runner 33" bfg mt's no lift. dubbed the marine by my frinds. dead as of august 14 2005. 84 ex cab p/u 33"a/t, 3" suspension+3"bodylift, thorley header and 2.25xhaust, downey midrange cam+rocker set, very milled head! NO RUST!
Re: Rollover [Re: lookmomnobrains] #633749 08/08/05 08:05 PM
Joined: Sep 2003
Posts: 1,686
Staceman Offline
Body Damage is Cool
Quote
Anyone know if their is any difference between the 85 and 86 cabs?

For the 4Runner body. No difference. 1984 to 1989 on the 4Runner are all the same. <img src="/forums/images/graemlins/wink.gif" alt="" />


85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!
Re: Rollover [Re: DA4RNR] #633750 08/08/05 08:25 PM
Joined: Oct 2003
Posts: 197
Cholltero Offline
Wheeler
Da: I have a empty runner top that I may trade for ?. Think I have some extra windows too.

Sorry about the roll, hope your boy is OK.

I'm in East county - San Diego


85' 4x4 e-cab flatbed 22r carb ((SOLD))
86' 4runner, 22re , "60 buck truck"
95' 4runner, 22re,5sd, last of the good ones
02' Tacoma prerunner, 2.7L, 5spd., 4x4
Re: Rollover [Re: Cholltero] #633751 08/08/05 10:53 PM
Joined: Nov 2003
Posts: 27
DA4RNR Offline OP
Getting the Wheeling Fever
My son came out OK. I was crushed because of the attachment to my 4Runner. It was the first truck I ever purchased. We were out in Ocotillo Wells and he went for a joy ride. He got sideways and hit the brakes then it was all over. I don't have any inventory to trade on the top. All the windows are OK except for the windshield.


Perminant Reminder of a Temporary Feeling
1985 4Runner w/ 3" NWOR Lift Kit
Detroit Lockers
Re: Rollover [Re: DA4RNR] #633752 08/09/05 08:03 PM
Joined: Oct 2003
Posts: 197
Cholltero Offline
Wheeler
Da : just come get the top if you you have a way to transport it. . 3-4 hours of gas and time is what you'll have in it. By the way , I'm looking for a ca or az. 85 4runner , straight and close to or not running.


85' 4x4 e-cab flatbed 22r carb ((SOLD))
86' 4runner, 22re , "60 buck truck"
95' 4runner, 22re,5sd, last of the good ones
02' Tacoma prerunner, 2.7L, 5spd., 4x4
Re: Rollover [Re: DA4RNR] #633753 08/10/05 12:33 AM
Joined: Nov 2002
Posts: 268
S
sdsnowman Offline
Mudrunner
ive got an 86 that was rolled sitting in my yard- youre welcome to any of the parts that may be of use to you- im in san diego...

Re: Rollover [Re: sdsnowman] #633754 01/19/06 08:43 PM
Joined: Nov 2003
Posts: 27
DA4RNR Offline OP
Getting the Wheeling Fever
Hey, my truck is finally coming back to life. Cholltero and sdsnowman, sorry for not answering. I kinda crawled into a cave after the roll. I was able to make a cash deal and get a windshield put in, driver door replaced, and one front panel replaced. The driver door does not roll up properly so I am going to try and take parts out of the old door. It is now in the shop getting some Detroit lockers installed. I need to put new tires on and will put those on in the coming weeks. What size tires do you guys recommend? I have 31's (AT) on now but am thinking of getting 33's (MT). It still has some dents and scratches so I was going to start to learn how to do some body work and try to smooth everything out. My friends advise me to leave it as is. They say it has more charactor. Any thoughts? What are your thoughts on fiberglass fenders? Cholltero and sdsnowman, do you still have parts available? I may want to drive down and take a look.


Perminant Reminder of a Temporary Feeling
1985 4Runner w/ 3" NWOR Lift Kit
Detroit Lockers
Page 1 of 2 1 2

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.009s Queries: 16 (0.006s) Memory: 0.6408 MB (Peak: 0.7604 MB) Data Comp: Off Server Time: 2026-11-16 11:16:34 UTC
Valid HTML 5 and Valid CSS