Which wire is cold side of stop lamp switch?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Which wire is cold side of stop lamp switch? #633803 08/06/05 03:28 AM

Joined: Sep 2001

Posts: 127

Logan, Utah

UteTroop

Wheeler

I'm installing a brake controller and need to tap into the cold side of the stop lamp switch. Does anyone know which wire that one would be? Here are my choices... Blue, Orange, Green w/ White stripe, Green w/ Yellow stripe.

If someone has done one of these and could share or if someone has a manual and could look it up that'd be great.

It's on my 2000 Trooper 4WD LS.

Thanks,

-Jared

-Jared

'00 Trooper S 4x4; OME 912 Coils; LT265/75/R16 Bridgestone Dueller A/T REVO's (Love'EM!)

Entire Thread
Subject	Posted By	Posted
Which wire is cold side of stop lamp switch?	UteTroop	08/06/05 03:28 AM
Re: Which wire is cold side of stop lamp switch?	JLEMOND	08/07/05 12:56 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.545s Queries: 15 (3.542s) Memory: 0.5947 MB (Peak: 0.6276 MB) Data Comp: Off Server Time: 2026-06-17 19:35:30 UTC
Valid HTML 5 and Valid CSS