Quote
Check very carefully. There are some dynamic forces in effect that may not allow it to contact hard, but even if it is close, it will cause that boot to be cut.


Thanks for the heads up Michael <img src="/forums/images/graemlins/kewl.gif" alt="" />

I should get a chance to flex it out next week and see how it looks. Mike (Rodeoguy) is the only one I know who's run these brackets for any length of time. He's had no issues that I know of, and he didn't clearance. He is running them on a 96, which I beleive has different control arms.

I figured that I could clearance the arms with everything in place with a die-grinder if the need arises (very carefully of course <img src="/forums/images/graemlins/scared.gif" alt="" />)

Andre

"SERENITY NOW!"

1995 Passport - TH700R4 - Twin-sticked Dana300 w/tera 4:1 - Leaf sprung SAS w/Dana 60/14BFF - 38.5x11 Boggers - DOR bumper w/ MM SE9500