|
|
|
|
No blink, blink action.
#634919
08/10/05 02:20 AM
|
Joined: Dec 2004
Posts: 31
OP
Getting the Wheeling Fever
|
I let my brother borrow my 89 LWB while he was doing his internship at Houston. He brought it back in fairly good condition, except for the blinkers; they wonÆt blink. He said the problem started after he used the hazard lights.
HereÆs the problem. When I turn on the hazard light only the right front light will blink and both of the rear ones. The left blinking light will not turn on. Whenever I put the turn signal either left or right I get no blinking action at all. I have replaced both of the front light bulbs along with the flasher near the pedals and I still have the same problem.
What else can I check/replace to get my turn signals to work? ItÆs really annoying to use the hand as a turning signal.
1989 Mitsubishi Montero LWB, Superwinch Manual Hubs
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.470s Queries: 15 (3.468s) Memory: 0.5976 MB (Peak: 0.6306 MB) Data Comp: Off Server Time: 2026-06-21 11:17:58 UTCValid HTML 5 and Valid CSS