OME 906 coils for 3rd gen

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

OME 906 coils for 3rd gen #635167 08/10/05 07:34 PM

Joined: Aug 2001

Posts: 2,205

N. California

BoostedInline6 Offline

Body Damage is Cool

Anyone have experience with the new OME 906 rear coils? These provide less lift than the 891s and may eliminate the need to run spacers up front for an even lift.

Entire Thread
Subject	Posted By	Posted
OME 906 coils for 3rd gen	BoostedInline6	08/10/05 07:34 PM
Re: OME 906 coils for 3rd gen	Anonymous	08/11/05 12:50 AM
Re: OME 906 coils for 3rd gen	azrain	08/11/05 04:50 AM
Re: OME 906 coils for 3rd gen	Jeff the marmot	08/11/05 05:07 AM
Re: OME 906 coils for 3rd gen	BoostedInline6	08/11/05 04:45 PM
Re: OME 906 coils for 3rd gen	Anonymous	08/12/05 02:22 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.354s Queries: 15 (3.352s) Memory: 0.6006 MB (Peak: 0.6336 MB) Data Comp: Off Server Time: 2026-05-26 02:13:29 UTC
Valid HTML 5 and Valid CSS