Intake manifold

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Intake manifold #635207 08/10/05 10:50 PM

Joined: Mar 2004

Posts: 120

Central Ga.

MuddRunner Offline

Wheeler

I am trying to remove a 4 cyl, 22re intake from the cyl. head and it doesn't want to budge. I am afraid of breaking the manifold, any ideas, thoughts, or mystery bolts I may be missing...
Thanx

'92 Pickup x-cab, 22re, auto.
'50 Ford Tudor Sedan, my new "Hot Rod"

Too much to do, too little time/$$$

Heb. 12.3

Entire Thread
Subject	Posted By	Posted
Intake manifold	MuddRunner	08/10/05 10:50 PM
Re: Intake manifold	Esquire812	08/10/05 11:03 PM
Re: Intake manifold	MuddRunner	08/11/05 01:19 AM
Re: Intake manifold	dieseltrooper	08/31/05 04:41 PM
Re: Intake manifold	Staceman	08/31/05 04:44 PM
Re: Intake manifold	dieseltrooper	08/31/05 08:45 PM
Re: Intake manifold	lilredrunner	08/31/05 09:14 PM
Re: Intake manifold	Esquire812	08/31/05 09:32 PM
Re: Intake manifold	dieseltrooper	08/31/05 09:46 PM
Re: Intake manifold	4Crawler	08/31/05 09:39 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.505s Queries: 15 (3.503s) Memory: 0.6117 MB (Peak: 0.6447 MB) Data Comp: Off Server Time: 2026-06-25 16:53:31 UTC
Valid HTML 5 and Valid CSS