Intake manifold

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Intake manifold [Re: Staceman] #635212 08/31/05 08:45 PM

Joined: Jun 2004

Posts: 189

Oklahoma City

dieseltrooper Offline

Wheeler

This bolt is being stubborn! Haven't been able to break it loose with the hex wrench. Been soaking with PB. Any tips? thx

Entire Thread
Subject	Posted By	Posted
Intake manifold	MuddRunner	08/10/05 10:50 PM
Re: Intake manifold	Esquire812	08/10/05 11:03 PM
Re: Intake manifold	MuddRunner	08/11/05 01:19 AM
Re: Intake manifold	dieseltrooper	08/31/05 04:41 PM
Re: Intake manifold	Staceman	08/31/05 04:44 PM
Re: Intake manifold	dieseltrooper	08/31/05 08:45 PM
Re: Intake manifold	lilredrunner	08/31/05 09:14 PM
Re: Intake manifold	Esquire812	08/31/05 09:32 PM
Re: Intake manifold	dieseltrooper	08/31/05 09:46 PM
Re: Intake manifold	4Crawler	08/31/05 09:39 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.187s Queries: 16 (4.185s) Memory: 0.6114 MB (Peak: 0.6444 MB) Data Comp: Off Server Time: 2026-06-23 03:43:21 UTC
Valid HTML 5 and Valid CSS