Intake manifold

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Intake manifold [Re: dieseltrooper] #635213 08/31/05 09:14 PM

Joined: Oct 2004

Posts: 45

Phoenix, Az.

lilredrunner Offline

Getting the Wheeling Fever

I had this same problem, broke my knock sensor off from prying before realizing that little bolt. try a 6mm allen head socket with extension. then you can put a breaker on if needed. be careful though it's a small diameter bolt.

Entire Thread
Subject	Posted By	Posted
Intake manifold	MuddRunner	08/10/05 10:50 PM
Re: Intake manifold	Esquire812	08/10/05 11:03 PM
Re: Intake manifold	MuddRunner	08/11/05 01:19 AM
Re: Intake manifold	dieseltrooper	08/31/05 04:41 PM
Re: Intake manifold	Staceman	08/31/05 04:44 PM
Re: Intake manifold	dieseltrooper	08/31/05 08:45 PM
Re: Intake manifold	lilredrunner	08/31/05 09:14 PM
Re: Intake manifold	Esquire812	08/31/05 09:32 PM
Re: Intake manifold	dieseltrooper	08/31/05 09:46 PM
Re: Intake manifold	4Crawler	08/31/05 09:39 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.692s Queries: 16 (3.690s) Memory: 0.6120 MB (Peak: 0.6450 MB) Data Comp: Off Server Time: 2026-06-24 16:43:34 UTC
Valid HTML 5 and Valid CSS