Ever replaced the Load Sensing Proportioning Valve?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Ever replaced the Load Sensing Proportioning Valve? [Re: DougH] #637178 08/17/05 01:54 AM

Joined: Jan 2000

Posts: 1,818

San Antonio, TX

Charlie Belew Offline

Body Damage is Cool

I bled the rears & proportioning valve after I did all the rear brake work. This weekend I replaced a soft hose up front & bled all 5 - rear/pro valve/front.

Entire Thread
Subject	Posted By	Posted
Ever replaced the Load Sensing Proportioning Valve?	Charlie Belew	08/16/05 04:05 AM
Re: Ever replaced the Load Sensing Proportioning Valve?	fasteddy	08/16/05 06:10 PM
Re: Ever replaced the Load Sensing Proportioning Valve?	pcc	08/16/05 06:29 PM
Re: Ever replaced the Load Sensing Proportioning Valve?	Charlie Belew	08/16/05 11:19 PM
Re: Ever replaced the Load Sensing Proportioning Valve?	DougH	08/16/05 11:41 PM
Re: Ever replaced the Load Sensing Proportioning Valve?	Charlie Belew	08/17/05 01:54 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.512s Queries: 16 (3.510s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-22 10:18:50 UTC
Valid HTML 5 and Valid CSS