Smiley, I think you've been dupped! <img src="/forums/images/graemlins/scared.gif" alt="" /> My bets are thats a D44 (or 10-bolt), and not a 60.

Looking at the tube size and the ujoint size of your closeup pict, things are a bit small. Another good give away is the passenger side ubolts. Cheyv D60's use two studs in the top of the housing rather than an inner ubolt. Also, those are definitely ball joint knuckles. Even though there are D60's with balljoints, these are more popular on the Ford drivers side drop axles, not the Chevys. Thats looks like a standard stock D44 Chevy steering arm to me, with the D44 arm bolt pattern. if its 8-lug, my guess is you're looking at a basic 3/4-ton Chevy D44.

The rear is most definitely a 14bff.

If it was me, I wouldn't pay more than about $300-400 tops for the pair of those axles.

-Rob