|
|
5.29 gears noticeable improvement off-road?
#640082
08/24/05 02:13 AM
|
Joined: Jan 2000
Posts: 758
OP
Rock Warrior
|
i'm planning on getting a set of 5.29s and wanted to set my expectations - i'm sure there is a noticeable improvement on the highway but was wondering what to expect on the trail. I guess the difference between 4.65 and 5.29 is around 12%. Does that even feel different when crawling?
thanks, dan
1986 Montero 2.6l 31X10.5 BFG MT - Weber carb with custom intake Rear LSD - RCI seats - Oil cooler - Manual hubs Custom bumpers front and rear + rock sliders
|
|
Re: 5.29 gears noticeable improvement off-road?
[Re: DanWheeler]
#640083
08/24/05 06:36 AM
|
Joined: Jan 2003
Posts: 1,741
Body Damage is Cool
|
3.9 to 4.6 sure made a good diferance to me.
87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...
|
|
Re: 5.29 gears noticeable improvement off-road?
[Re: DanWheeler]
#640084
08/24/05 05:42 PM
|
Joined: Dec 2004
Posts: 5,231
Trail Leader
|
Here are the numbers (1st gear x t-case gear x diff gear = crawl ratio):
3.918 x 1.925 x 4.625 = 34.88 to 1 crawl ratio (stock)
3.918 x 1.925 x 5.29 = 39.90 to 1 crawl ratio (5.29's are the only change)
3.918 x 2.85 x 4.625 = 51.64 to 1 crawl ratio (2.85 t-case is the only change)
3.918 x 2.85 x 5.29 = 59.07 to 1 crawl ratio (both t-case and diffs are changed)
?_________ |_|_|\____\___ l-----[O]≡≡≡≡[O] ()_)()_)-----)_) Stay the Trail!
|
|
Re: 5.29 gears noticeable improvement off-road?
[Re: CapnCrunch]
#640085
08/24/05 07:26 PM
|
Joined: Jan 2000
Posts: 758
OP
Rock Warrior
|
Here are the numbers (1st gear x t-case gear x diff gear = crawl ratio):
3.918 x 1.925 x 4.625 = 34.88 to 1 crawl ratio (stock)
3.918 x 1.925 x 5.29 = 39.90 to 1 crawl ratio (5.29's are the only change)
3.918 x 2.85 x 4.625 = 51.64 to 1 crawl ratio (2.85 t-case is the only change)
3.918 x 2.85 x 5.29 = 59.07 to 1 crawl ratio (both t-case and diffs are changed) *drool* Thanks a bunch for pulling the numbers together. I think i'm gonna order up the 5.29s here soon. I guess they're not going to make a huge difference on the trail but they'll help a little getting to the highway. now i just need to find a V6 donor front axle. BTW - whats the availability on those xfer gears? did they all get sold? who is distributing them? thanks, dan
1986 Montero 2.6l 31X10.5 BFG MT - Weber carb with custom intake Rear LSD - RCI seats - Oil cooler - Manual hubs Custom bumpers front and rear + rock sliders
|
|
Re: 5.29 gears noticeable improvement off-road?
[Re: DanWheeler]
#640086
08/24/05 07:37 PM
|
Joined: Dec 2004
Posts: 5,231
Trail Leader
|
BTW - whats the availability on those xfer gears? did they all get sold? who is distributing them? Last I knew they were sold out but Mark Hardman was going to make more later this year.
?_________ |_|_|\____\___ l-----[O]≡≡≡≡[O] ()_)()_)-----)_) Stay the Trail!
|
|
Re: 5.29 gears noticeable improvement off-road?
[Re: DanWheeler]
#640087
08/24/05 09:47 PM
|
Joined: May 2003
Posts: 613
Rock Warrior
|
3.918 is first gear on the V6 V5MT1 5-spd tranny. The 4cyl KM145 5-spd tranny has a 3.967 1st gear and the KM148 auto tranny has a 2.826 1st gear. So your final crawl ration will be a little different using these numbers.
Last edited by Yellowhammer; 08/24/05 09:48 PM.
1991 Montero LS 3.0 5-Spd LWB 31" Bridgestone Dueller ATs on stock rims, tan/tan interior/exterior 1986 Isuzu Trooper 2.3 5-spd - partially disassembled, tan interior/dark blue exterior
|
|
Re: 5.29 gears noticeable improvement off-road?
[Re: Yellowhammer]
#640088
08/24/05 10:00 PM
|
Joined: Jan 2000
Posts: 758
OP
Rock Warrior
|
59.8:1 with my 5spd 4cyl stick... oooh, so close to 60:1!
thats gotta be enough torque to start breaking parts.
1986 Montero 2.6l 31X10.5 BFG MT - Weber carb with custom intake Rear LSD - RCI seats - Oil cooler - Manual hubs Custom bumpers front and rear + rock sliders
|
|
Re: 5.29 gears noticeable improvement off-road?
[Re: Yellowhammer]
#640089
08/24/05 10:18 PM
|
Joined: Dec 2004
Posts: 5,231
Trail Leader
|
Did not know that. Was always under the impression it was 3.918
?_________ |_|_|\____\___ l-----[O]≡≡≡≡[O] ()_)()_)-----)_) Stay the Trail!
|
|
Re: 5.29 gears noticeable improvement off-road?
[Re: DanWheeler]
#640090
08/24/05 10:28 PM
|
Joined: Dec 2004
Posts: 5,231
Trail Leader
|
thats gotta be enough torque to start breaking parts. Yes, and that's why I'm thinking I'll stay with 33's instead of moving to 35's. 5.29 gears will allow you to turn 35's but the downfall is that there will be less teeth from the pinion gear engaged into the ring gear. The pinion gear can become a weak point.
?_________ |_|_|\____\___ l-----[O]≡≡≡≡[O] ()_)()_)-----)_) Stay the Trail!
|
|
Re: 5.29 gears noticeable improvement off-road?
[Re: CapnCrunch]
#640091
08/24/05 11:44 PM
|
Joined: Jan 2000
Posts: 8,160
Web Wheeler
|
5:29s are not going to break. They are still massive cogs, and mine have been fine for quite a few years, under harsh abuse and several broken axles. As far as specific difference, its hard to compare. I did the 2:85 t/case gears first. BUT, the 5:29s made a HUGEEEE performance improvement for the highway, and the transmission shift points. With 35s my speedometer is off no more then a 1/2 MPH, another advantage.
But if your making the choice, get 2:85s first, and 5:29s when you are ready for 35s.
1996 SR From the Area 51 Skunk Works. 37"BFG Tires, 5" lift, Rock Track 4:1 Case, Tom Woods Drive Shafts, Oasis Air, Front ARB, lifted gas tank, T-max winch and lots of stuff that cost too much.
|
|
|
|