|
|
|
|
 How tight to torque down lug nuts?
#640316
08/24/05 08:14 PM
|
Joined: Oct 2004
Posts: 108
OP
Wheeler
|
Sorry for the stupid question. I lost my chiltons manual, and rotated my tires today. I need to know the torque specs for the lug nuts. Thanks in advace
/1996 Trooper SE\
OME 912's w/2.5" spacers, Superwinch hubs, 265/75R16 Yokohama Geolanders (street), 34x10.50x15 Super Swamper LTB's, Indy4x HD Tie Rods, Indy4x Rock Sliders
|
|
|
Re: How tight to torque down lug nuts?
[Re: 96TrooperSE]
#640317
08/24/05 08:40 PM
|
Joined: Apr 2003
Posts: 898
Rock Warrior
|
If you have aluminum wheels, torque should be 87 ft/lbs.
Don't remember about the steel, but
I think it was 70 or 75 ft/lbs.
1995 Trooper LS auto 3.2 DOHC /w SOHC intake
1989 Trooper 2.6 auto
1989 I-Mark RS DOHC 1.6
1991 Stylus XS DOHC 1.8
|
|
|
Re: How tight to torque down lug nuts?
[Re: litnin]
#640318
08/24/05 09:56 PM
|
Joined: Oct 2004
Posts: 108
OP
Wheeler
|
Thanx for the quick reply. I do have the alloy wheels so 87 it is.
/1996 Trooper SE\
OME 912's w/2.5" spacers, Superwinch hubs, 265/75R16 Yokohama Geolanders (street), 34x10.50x15 Super Swamper LTB's, Indy4x HD Tie Rods, Indy4x Rock Sliders
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.011s Queries: 15 (0.009s) Memory: 0.5920 MB (Peak: 0.6449 MB) Data Comp: Off Server Time: 2026-07-13 22:15:41 UTCValid HTML 5 and Valid CSS 