How tight to torque down lug nuts?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How tight to torque down lug nuts? [Re: 96TrooperSE] #640317 08/24/05 08:40 PM

Joined: Apr 2003

Posts: 898

Dallas, GA

litnin

Rock Warrior

If you have aluminum wheels, torque should be 87 ft/lbs.

Don't remember about the steel, but
I think it was 70 or 75 ft/lbs.

1995 Trooper LS auto 3.2 DOHC /w SOHC intake
1989 Trooper 2.6 auto
1989 I-Mark RS DOHC 1.6
1991 Stylus XS DOHC 1.8

Entire Thread
Subject	Posted By	Posted
How tight to torque down lug nuts?	96TrooperSE	08/24/05 08:14 PM
Re: How tight to torque down lug nuts?	litnin	08/24/05 08:40 PM
Re: How tight to torque down lug nuts?	96TrooperSE	08/24/05 09:56 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.528s Queries: 16 (3.525s) Memory: 0.5947 MB (Peak: 0.6277 MB) Data Comp: Off Server Time: 2026-07-16 12:50:57 UTC
Valid HTML 5 and Valid CSS