How tight to torque down lug nuts?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How tight to torque down lug nuts? [Re: litnin] #640318 08/24/05 09:56 PM

Joined: Oct 2004

Posts: 108

Madison, Wisconsin

96TrooperSE Offline

Wheeler

Thanx for the quick reply. I do have the alloy wheels so 87 it is.

/1996 Trooper SE\
OME 912's w/2.5" spacers, Superwinch hubs, 265/75R16 Yokohama Geolanders (street), 34x10.50x15 Super Swamper LTB's, Indy4x HD Tie Rods, Indy4x Rock Sliders

Entire Thread
Subject	Posted By	Posted
How tight to torque down lug nuts?	96TrooperSE	08/24/05 08:14 PM
Re: How tight to torque down lug nuts?	litnin	08/24/05 08:40 PM
Re: How tight to torque down lug nuts?	96TrooperSE	08/24/05 09:56 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.561s Queries: 16 (3.558s) Memory: 0.5963 MB (Peak: 0.6293 MB) Data Comp: Off Server Time: 2026-07-16 08:18:33 UTC
Valid HTML 5 and Valid CSS