Er...I haven't actually done it this way. The front end I got from the junkyard was a whole front end (the junkyard sawed through the frame, t-bars, and drive shaft and gave me everything forward). Everything was easy-access.

Thinking off the top of my head, and without the benefit of having my rig here with me at work for reference, I'm thinking:

-unbolt the drive shaft at the diff end and skid plates (both forward skid plates if possible)
-remove the calipers
-remove the hub assemblies (hub-locks, hubs/rotors, bearings)
-unbolt the axles at both ends and move them as far out of the way from the diff as they'll go
-unbolt the diff from the mounts and twist it out
-pull the shafts out from the inside
-have a couple pickle-forks and a BFH handy just in case

If you're doing the V6 brake upgrade as well you'll need the calipers, rotors, and booster.

I'm thinking I forgot to account for something (I had a shop completely rebuild my diff/axles)...


?_________
|_|_|\____\___
l-----[O]≡≡≡≡[O]
()_)()_)-----)_)

Stay the Trail!