Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
quickest way to pull a V6 front diff / axles / brakes etc. #640790 08/25/05 11:49 PM
Joined: Jan 2000
Posts: 758
DanWheeler Offline OP
Rock Warrior
Are there any tricks to pull the V6 front diff, axles and brakes from a junkyard donor? I dont want to spend all day there. I have my hand impact wrench and the 8mm hex but i'm wondering if it would just be easier to disconnect the A arms and driveshaft and just drop the whole thing?

any advice appreciated

thanks,
dan


1986 Montero 2.6l
31X10.5 BFG MT - Weber carb with custom intake
Rear LSD - RCI seats - Oil cooler - Manual hubs
Custom bumpers front and rear + rock sliders
Re: quickest way to pull a V6 front diff / axles / brakes etc. [Re: DanWheeler] #640791 08/26/05 03:19 AM
Joined: Dec 2004
Posts: 5,231
CapnCrunch Offline
Trail Leader
***
Er...I haven't actually done it this way. The front end I got from the junkyard was a whole front end (the junkyard sawed through the frame, t-bars, and drive shaft and gave me everything forward). Everything was easy-access.

Thinking off the top of my head, and without the benefit of having my rig here with me at work for reference, I'm thinking:

-unbolt the drive shaft at the diff end and skid plates (both forward skid plates if possible)
-remove the calipers
-remove the hub assemblies (hub-locks, hubs/rotors, bearings)
-unbolt the axles at both ends and move them as far out of the way from the diff as they'll go
-unbolt the diff from the mounts and twist it out
-pull the shafts out from the inside
-have a couple pickle-forks and a BFH handy just in case

If you're doing the V6 brake upgrade as well you'll need the calipers, rotors, and booster.

I'm thinking I forgot to account for something (I had a shop completely rebuild my diff/axles)...


?_________
|_|_|\____\___
l-----[O]≡≡≡≡[O]
()_)()_)-----)_)

Stay the Trail!

Re: quickest way to pull a V6 front diff / axles / brakes etc. [Re: CapnCrunch] #640792 08/26/05 05:10 AM
Joined: Aug 2004
Posts: 1,997
Chris_J Offline
Body Damage is Cool
SAWZALL <img src="/forums/images/graemlins/evil.gif" alt="" />

Re: quickest way to pull a V6 front diff / axles / brakes etc. [Re: CapnCrunch] #640793 08/26/05 06:47 AM
Joined: Jan 2000
Posts: 758
DanWheeler Offline OP
Rock Warrior
thanks Joe - i'm dreading doing the job. last time I went out to the yard to pull one, the hex keys on the hubs just stripped. That was before I had the hand impact wrench though.

I just noticed you have a SWB 2.6... i had always looked at your avatar and thought you had the LWB V6. Kudos for putting all that cool stuff on with the 2.6! Thats the direction I'm headed. It's taken me 4-5 years to stabilize the 2.6 but now that i've got it under control (so I think) it's time to get advanced.


1986 Montero 2.6l
31X10.5 BFG MT - Weber carb with custom intake
Rear LSD - RCI seats - Oil cooler - Manual hubs
Custom bumpers front and rear + rock sliders
Re: quickest way to pull a V6 front diff / axles / brakes etc. [Re: DanWheeler] #640794 08/26/05 09:24 AM
Joined: Dec 2004
Posts: 5,231
CapnCrunch Offline
Trail Leader
***
Yeah, getting all that stuff can be a messy job. I just got lucky with getting the whole front end. Last time I pulled hub bolts at the 'yard I just locked some vice grips on 'em and turned. That did the trick.

Thanks for the kudos, Dan. It's been a long road but my 2.6 is really coming into its own. It's surprising how much its capability has so vastly improved over this last year. Stuff I couldn't dream of doing before is now a walk in the park. The little 2.6 isn't very muscular on the road but off-road at crawl-speeds it gets the job done. Nonetheless, I'm not finished by a long-shot. Plenty more work to be done before I'm finished modifying.

The avatar is a mini of this picture (photo credit goes to HMD...I believe he took this picture):

[Linked Image]


?_________
|_|_|\____\___
l-----[O]&#8801;&#8801;&#8801;&#8801;[O]
()_)()_)-----)_)

Stay the Trail!








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 1.698s Queries: 15 (0.006s) Memory: 0.6082 MB (Peak: 0.6899 MB) Data Comp: Off Server Time: 2026-11-16 08:53:20 UTC
Valid HTML 5 and Valid CSS