Gen I Torsion Bars -- Too Much?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen I Torsion Bars -- Too Much? [Re: mama] #641946 09/07/05 11:55 PM

Joined: Jun 2004

Posts: 1,904

wyleone

Body Damage is Cool

Re indexing. It means to turn the torsion bar one spline to get more tension "bite". Usually you will only have to do this if one bar is sagging or if you bottom the ajastment and not get the factory spec height ajustment.

Entire Thread
Subject	Posted By	Posted
Gen I Torsion Bars -- Too Much?	silverwriter	08/29/05 04:12 PM
Re: Gen I Torsion Bars -- Too Much?	FrankR	08/29/05 06:07 PM
Re: Gen I Torsion Bars -- Too Much?	DMYERSCHATTTN	08/29/05 08:13 PM
Re: Gen I Torsion Bars -- Too Much?	mama	09/07/05 10:12 PM
Re: Gen I Torsion Bars -- Too Much?	wyleone	09/07/05 11:55 PM
Re: Gen I Torsion Bars -- Too Much?	DaphneD	08/29/05 11:16 PM
Re: Gen I Torsion Bars -- Too Much?	silverwriter	09/07/05 05:37 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.469s Queries: 16 (3.467s) Memory: 0.6050 MB (Peak: 0.6380 MB) Data Comp: Off Server Time: 2026-06-15 00:04:30 UTC
Valid HTML 5 and Valid CSS