Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
ARB Bull Bars ?????????????? #641970 08/29/05 08:38 PM
Joined: Feb 2004
Posts: 26
E
EDS2000tacoma Offline OP
Getting the Wheeling Fever
Does any one know if you can install an ARB front bumper (winch bull bar) on a tacoma with a 3" body lift. if any body has done that and has pics i would like to see them.
Thanks,
EDS

Last edited by EDS2000tacoma; 08/29/05 08:40 PM.

Eric S.

2000 Tacoma
-6in of lift,33x12.50 truxx's M/T's
Re: ARB Bull Bars ?????????????? [Re: EDS2000tacoma] #641971 08/29/05 10:56 PM
Joined: Aug 2001
Posts: 5,986
Red_Chili Offline
Toyota Section Staffer
Sure... with a welder and fab skills. It will not install without modification. But anything is possible with a torch and MIG.


-Bill
'87 4Runner w/ '96 5VZ-FE, 'Red Chili II'
'97 Taco XtraCab 3RZ-FE, 'BlackBean'
TLCA # 13257, Rising Sun 4x4 Club Land Use Coordinator
"He who stops being better stops being good." -Oliver Cromwell

Moderated by  4x4Wire, Dandeman, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.5863 MB (Peak: 0.6343 MB) Data Comp: Off Server Time: 2026-06-10 17:11:44 UTC
Valid HTML 5 and Valid CSS