Front driveshaft question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Front driveshaft question [Re: Bustedback] #642608 09/02/05 12:31 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

They generally run around $300 with your stock shaft. I had Jesse's dad's shop build mine (Paradise Driveline), since I went there by mistake. He built me two long-travel, heavy splined shafts for about $300 ea.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Front driveshaft question	Bustedback	08/31/05 08:45 PM
Re: Front driveshaft question	CraShYota	08/31/05 08:54 PM
Re: Front driveshaft question	Bustedback	09/01/05 11:54 PM
Re: Front driveshaft question	4Crawler	09/02/05 12:31 AM
Re: Front driveshaft question	CraShYota	09/02/05 02:01 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.672s Queries: 16 (3.670s) Memory: 0.6026 MB (Peak: 0.6356 MB) Data Comp: Off Server Time: 2026-06-13 17:07:04 UTC
Valid HTML 5 and Valid CSS