Made front skid plate for lift

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Made front skid plate for lift [Re: DC] #642625 09/01/05 04:33 PM

Joined: May 2001

Posts: 849

Riverside, CA, USA

hotrod4x5

Rock Warrior

Hey DC, remember me, we ran Cleghorn a few years ago. We went the wrong way and I got tons of scratches, remember?

That skid plate looks cool.

My Monty is laid up right now, the crank bolt broke off and I just got the broken half out, now I am trying to figure out if I can just put it back together or not...

Rodney,95 SR 3.5 L, Rancho RS 9000's, 31x10.5-15 Bridgestone Dueler A/T's, OEM Rear locker My Monty in action!

Entire Thread
Subject	Posted By	Posted
Made front skid plate for lift	DC	08/31/05 09:44 PM
Re: Made front skid plate for lift	Angelo	09/01/05 07:15 AM
Re: Made front skid plate for lift	hotrod4x5	09/01/05 04:33 PM
Re: Made front skid plate for lift	RockU	09/11/05 07:11 PM
Re: Made front skid plate for lift	DC	09/12/05 07:03 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.505s Queries: 16 (3.502s) Memory: 0.6012 MB (Peak: 0.6341 MB) Data Comp: Off Server Time: 2026-06-10 15:10:37 UTC
Valid HTML 5 and Valid CSS