Progress so far...I followed Brew's setup and wired everything behind the shroud to keep it looking clean. I drilled 5 holes next to the VSC for the two positive and two negative 10 gauge wires and the 14 gauge ignition hotwire...
[img][image]http://images6.theimagehosting.com/IMG_0055.073.JPG[/img][/image]
On the driver side of the fan shroud i drilled three more holes, 10 gauge wire to negative terminal, 10 gauge wire to the positive terminal, and 14 gauge wire to the ignition fuse , which will be wired with a painless fuse block during the install. What you see here took me about 1.5 hours...i expect the install will take just as long.
[img][image]http://images6.theimagehosting.com/IMG_0053.32f.JPG[/img][/image]