Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Dana Vent hose #643372 09/02/05 06:00 PM
Joined: Jul 2004
Posts: 105
F
fidgit Offline OP
Wheeler
I was wonder if anyone had any idea's on how to extend the vent hose for the Dana's. And what type of hose to use and what size. I have a 03 Rubi.

Thank you in advance.

Re: Dana Vent hose [Re: fidgit] #643373 09/02/05 09:03 PM
Anonymous
Unregistered
I use 3/8's vac/fuel hose. It's nothing special just a line that lets air in and out.

Re: Dana Vent hose #643374 09/02/05 09:43 PM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
Hey Sunder The front one on my FX-4 is up to the top of my master cylinder...from the factory. I have not looked at where the back one is.
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.009s Queries: 15 (0.007s) Memory: 0.5876 MB (Peak: 0.6404 MB) Data Comp: Off Server Time: 2026-07-13 19:17:28 UTC
Valid HTML 5 and Valid CSS