Pulled out the sawz-all again

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Pulled out the sawz-all again #643696 09/04/05 03:17 AM

Joined: Jul 2000

Posts: 614

N Hollywood, CA,USA

Rock Warrior

Well. It always hurts when I do the cutting at first and then the results make up for it. The rear bumber for the sports are horrible. THey are designed after the mini van for very low step in for the groceries. It was the first thing to always get hit. So it had to go. I'm working on a tube frame style with swing out tire carrier.

Before
[Linked Image]

After:

this what I'm going to make. Similar but mine is going to be welded on and will sit a little higher on the body.
[Linked Image]

DC

97Sport A/T 33's
locked front & rear 4.90
5" IFS Lift

Entire Thread
Subject	Posted By	Posted
Pulled out the sawz-all again	DC	09/04/05 03:17 AM
Re: Pulled out the sawz-all again	Lloyd Swartz	09/04/05 03:37 AM
Re: Pulled out the sawz-all again	DC	09/04/05 07:13 AM
Re: Pulled out the sawz-all again	justice	09/04/05 02:49 PM
Re: Pulled out the sawz-all again	off-roader	09/04/05 04:01 PM
Re: Pulled out the sawz-all again	DC	09/04/05 05:21 PM
Re: Pulled out the sawz-all again	LRJ4x4	09/04/05 05:34 PM
Re: Pulled out the sawz-all again	Angelo	09/05/05 03:10 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: