Transfer case flange nut size?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Transfer case flange nut size? #645262 09/09/05 12:14 AM

Joined: Sep 2005

Posts: 10

SLC, Utah

BuleToy

Need a Spot

I just got new Tom Woods driveshafts for my 4 cylinder '89 toy. I had the front CV joint welded to the rear drive shaft. I need to switch the flanges from front to rear on the transfer case. Currently I am at work and I don't think I have the right socket size at home. I was hoping to stop by sears on the way home and get the right size. Anyone got a clue?

Entire Thread
Subject	Posted By	Posted
Transfer case flange nut size?	BuleToy	09/09/05 12:14 AM
Re: Transfer case flange nut size?	4Crawler	09/09/05 12:48 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.452s Queries: 15 (3.581s) Memory: 0.5940 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-06-10 02:58:30 UTC
Valid HTML 5 and Valid CSS