Clunk while stopping

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Clunk while stopping [Re: rmg] #645914 09/14/05 02:04 AM

Joined: Feb 2005

Posts: 1,489

Seattle

Jake97T

Body Damage is Cool

Everything looks tight, i pulled on the tire as much as i could, i could get it to clunk a little pushing and pulling on it.

My upper ball joints are new, lower ball joints are not, TRE's are tight and not binding,

Can the brake rotor get loose somehow and move around???

97 FZJ80, Stock, Factory Lockers.

Entire Thread
Subject	Posted By	Posted
Clunk while stopping	Jake97T	09/10/05 11:06 PM
Re: Clunk while stopping	4xGeek	09/12/05 04:37 PM
Re: Clunk while stopping	rmg	09/12/05 05:08 PM
Re: Clunk while stopping	Jake97T	09/14/05 02:04 AM
Re: Clunk while stopping	garym	09/14/05 06:11 AM
Re: Clunk while stopping	4xGeek	09/14/05 11:21 PM
Re: Clunk while stopping	Jake97T	09/15/05 12:09 AM
Which TRE's to buy???	Jake97T	09/15/05 02:19 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.487s Queries: 16 (3.485s) Memory: 0.6083 MB (Peak: 0.6412 MB) Data Comp: Off Server Time: 2026-06-01 16:16:18 UTC
Valid HTML 5 and Valid CSS