Clunk while stopping

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Clunk while stopping [Re: Jake97T] #645916 09/14/05 11:21 PM

Joined: Nov 2002

Posts: 1,921

Carlsbad, CA

4xGeek

Body Damage is Cool

Quote

Can the brake rotor get loose somehow and move around???

The wheel *should* be holding it tightly in place... That said, I'm beginning to wonder a little - while rotating the tires on the wifey's rig a week ago I noticed that her rotors had about 1/8" play on the studs... And I think that explains an intermittent braking vibration she gets.

4xGeek (Chris)
'97 T-100 4wd sr5-suto, 3" BL, 1.5" BJ spacers, 35" ProComp AT's, 4.88's, Bilsteins x 6, etc...

No longer stuck in SoCal!!

Entire Thread
Subject	Posted By	Posted
Clunk while stopping	Jake97T	09/10/05 11:06 PM
Re: Clunk while stopping	4xGeek	09/12/05 04:37 PM
Re: Clunk while stopping	rmg	09/12/05 05:08 PM
Re: Clunk while stopping	Jake97T	09/14/05 02:04 AM
Re: Clunk while stopping	garym	09/14/05 06:11 AM
Re: Clunk while stopping	4xGeek	09/14/05 11:21 PM
Re: Clunk while stopping	Jake97T	09/15/05 12:09 AM
Which TRE's to buy???	Jake97T	09/15/05 02:19 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.418s Queries: 16 (3.416s) Memory: 0.6080 MB (Peak: 0.6410 MB) Data Comp: Off Server Time: 2026-06-01 12:40:22 UTC
Valid HTML 5 and Valid CSS