|
|
|
|
Re: steering shaft alignment
[Re: 4Crawler]
#646489
09/13/05 04:28 AM
|
Joined: Mar 2003
Posts: 433
OP
Mudrunner
|
<img src="/forums/images/graemlins/kewl.gif" alt="" />Thanks Roger.I might just try to align it myself using the fishing string method.Run fishing string from the back of the rear tire to the front of the front tire.I set the toe-in using a tape measure and getting both tie rod ends at equal lengths,now I need to adjust the lower control arms in or out to line the outside of the front tires with the string.The string should be straight from the front of the front tire to the back of the rear tire without any part of the front tire bulching the string out.Wish me luck or I'll be spending some bucks on a professional jod.YIKES!!! <img src="/forums/images/graemlins/cheers.gif" alt="" />
87'4runner-22re,5spd
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 7.224s Queries: 16 (7.221s) Memory: 0.5968 MB (Peak: 0.6298 MB) Data Comp: Off Server Time: 2026-11-02 16:00:08 UTCValid HTML 5 and Valid CSS